Tips Lubricate the chain, Do Lubricate Chain With Used Oil

To keep the motorcycle chain remains well owners typically use a lubricant to lubricate the chain of the bike, but here to note the use of lubricants, many of the riders lay people who do not know about how to lubricate the chain is good and true, they use waste oils to lubricate the chain, this is certainly not recommended.

It’s actually based on my own experience when lubricate the chain, first because it did not know about how to lubricate the chain well I carelessly using used oil, as they often see people using used oil to the chain. As a result of my chain so noisy and there are patches of rust if late lubricate the chain, ya understand lah, still do not know, hehe Well, to answer that all this time the automotive universe will discuss, observe good ya! :-)

Why type of lubricant to be the first to note, because it is the underlying to lubricate the chain of your vehicle.

Do not use used oil to lubricate the chain, because the used oil containing residual waste products of combustion in the engine, and debris, and if it is used to lubricate the chain can impact erosion on your chain, and the chain you will easily corroded and also noisy. Use a special lubricating bike chains are sold in stores that sell equipment motorcycle maintenance or repair shop, specialty lubricants usually have the name Chain Lube chain.

By using the Chain Lube we could reduce the noise a bit noisy chains and keeping it durable.

4 Ways to Maintain Motorcycle Chain


For those of you who use the bike as a vehicle daily to work, to school, and doing anything, maybe obstacles that often arises is the problem of the chain.

Moreover, if it is coming rainy season, the chain will be soiled by mud, then dried briefly, wet again exposed to rain and eventually become loose. Slack will cause your motor is noisy and uncomfortable to wear. The worst thing is the chain broke and the motor can be damaged. Of course you do not want that to happen, is not it?

Well, here are tips for caring for your bike chain so durable and do not hassle you. Want to know what? Here’s his review:

1. Check the chain Regularly

Checking chain regularly will keep you from damage. Not just loosen or tighten, but set the lock pin connection on the chain and clean the dirt-dirt.

If you often pass through potholes and often at high speed, will potentially change the pin position. Because the load chain wheel motors to pull more weight.

The ideal is to check the condition of the chain every 1000km once. That will reduce the risk of damage to the chain.

2. Clean Dirt

Cleaning the dirt is very important, because as described previously. The rainy season is a catastrophe for the chain. Because it tends to make you lazy to wash motors because they thought it would be useless if it turns out after rain washed back down.

Do not be underestimated, because the chain is an essential component of the motor. cleanliness is directly proportional to the comfort you feel. If not cleaned, the chain will rust.

Clean the chain with a cleanser that is already in the shop or garage, then do not forget to give the lubricant after cleaning. We recommend doing this cleaning once every month.

3. Cut Chain One Time

By cutting chain is one of the most ideal way and precise if you want to stay. Because it can keep you on the chain slack.

Nothing to worry about for this one thing, it is still valid and remains safe for you. However, you should remember, if you’ve never done one chain scission, then not again cut for the second time. It is only recommended for cutting one time only.

4. Tighten As Rear Wheel

It also has an effect on your comfort. If As the rear wheel is loose, then it can make the chain slack and trouble you in the trip. Besides causing noisy sounds, the chain can also be separated from the gear and lets you fall later.

Those are some ways to take care of your bike chain in order to remain usable longer. Hope it is useful.